ACD dicon dual L Electronic Controller, long stroke AddL

acd_dicon_dual_105
acd_dicon_dual_105acd_dicon_dual_402acd_dicon_dual_203
AUD $450.00 each Out of stock Brand: ACD proACD pro


ACD dicon dual Electronic Controller
The ACD Dicon is equally suitable for digital and analog slot racing.
ACD dicon dual controller with advanced features.
The ACD dicon dual is the union of the slot racing worlds in one single appliance.
In analog mode, the device offers all the features of an ACD per controller. In addition, there is an extended braking characteristic and a deactivatable brake button. The device offers the well-known ACD braking technology but can be switched to traditional braking. The slot racing. You almost always have the right controller with you.
In digital mode, the device is 100% compatible with the General Info
 ACD dicon system and can be used immediately with this system. All you have to do is disconnect the plug of the handset from the box and plug it into the ACD dicon driver's seat.
Thanks to its robustness and technology, the device, like all ACD controllers, is very long-lasting and safe in the future. The controller's question has been solved for many years and you can dedicate your activities to driving pleasure.
 
1. Features
Contactless triggering with adjustable characteristic
Optionally long trigger off (L) 
Braking immediately at the first speed reduction or braking at the zero position of the trigger 
Microcontroller controlled according to the PWM principle § Built-in brake and sensitivity adjuster
Controller for voltage reduction
Switchable negative or positive control
Protected against short-term reverse polarity 
Low weight 
Complies with EU directives WEEE / CE
 
2. General
The handset can be disconnected from the junction box and used as a digital controller for ACD dicon digital system.
The ACD dual is a complete replacement of the previous resistor based devices. Instead of changing the series resistor, the ACD dual controls the output voltage to the motor according to the PWM principle (Pulse Width Modulation).
The PWM mode of operation allows a different type of brake. The so-called regenerative braking was previously activated by the connection of load resistances or by a short circuit at the trigger zero point. The resistance / short circuit has then loaded the motor accordingly and thus achieved a braking effect. The smaller the resistance value, the greater the braking effect. At short circuit the braking effect is highest. The ACD dual works differently at this point: The braking energy is not converted into heat but is returned to the power supply. Here, the braking effect begins at the first reduction of the speed. This means that the engine is braked immediately to the new lower speed. This is so noticeable in practice that the Motor speed always follows the trigger position immediately. The motor is positively guided, so to speak.
The braking effect can be adjusted via the brake actuator. This will adapt the behaviour to your own taste. The ACD dual offers better overall acceleration on starting and better braking on the corners. Optimal use of these features helps the ACD achieve shorter dual lap times. However, the braking mode on the ACD dual can be changed and it behaves like the traditional mechanical controller and brakes only at the zero position of the trigger.
 
3. Technique
Connection box operating voltage: 7 to 22V Continuous current: 10A Max peak current: 30A The peak current is to be considered impulsively. This corresponds to the starting current of an engine. The device can handle more power. However, if the peak current is reached or exceeded very frequently, it can cause problems.

Copyright© Ace Hobbies 2016
Website by Websites With Purpose